Floor Tile Installation
A floor tile job that lasts starts well below the surface. We flatten, level, and prepare every subfloor before a single tile touches it. The result holds up to foot traffic, furniture, and time.
Call (916) 345-2607
Floor Tile Done Properly
Most of the floor tile failures I've seen come back to one thing: the installer didn't spend enough time on the subfloor. Tile is rigid. Subfloors flex. If there's too much movement below, the tile cracks or the grout crumbles in the joints within a year or two. Concrete subfloors can have high spots and low spots that cause lippage in large-format tiles. Wood subfloors need to be stiff enough and covered with backer board before tile goes down.
We check deflection on wood subfloors using the L/360 standard, which means the floor can flex no more than the span in inches divided by 360 under a 300-pound load. If it doesn't meet that, we add blocking or underlayment before tile goes down. It's an unglamorous part of the job, but it's what separates an install that holds from one that doesn't.
Tile Formats We Work With
Large-Format Porcelain
24x24, 24x48, and larger. Requires a very flat substrate and back-buttering to prevent voids.
Wood-Look Plank Tile
6x24 and 8x48 planks in running bond or herringbone patterns. Cuts must be precise for pattern continuity.
Natural Stone
Travertine, limestone, slate, and marble. Each needs specific thinset and sealer selection.
Patterned & Encaustic
Cement tile, hex tile, and decorative patterns. Layout centering is critical for these.
Where We Install Floor Tile
Kitchens, dining rooms, entryways, hallways, laundry rooms, mudrooms, and open-plan living areas. We work in new construction and in existing homes where flooring is being replaced. If the existing tile needs to come out first, we handle demo and haul-off.
Floor tile installation available in Rocklin, Loomis, and Granite Bay.